pertama, kita harus membersihkan se

pertama, kita harus membersihkan seluruh permukaan yang akan di cat, selanjutnya ke tahap (flaking paint) yaitu serpihan, jika ada serpihan kita harus membersihkan terlebih dahulu, jika tidak kita bisa ke tahap selanjutnya. tahap selanjutnya yaitu dempul yang berguna untuk menyamakan semua permukaan, jika membutuhkan dempul maka kita harus mendempul dari awal sampai akhir. jika tidak menggunakan dempul maka kita harus ratakan, selanjutnya (exposed wood) yaitu mengecek dan memeriksa seluruh kayu apakah kayu tersebut bisa digunakan atau tidak. jika bisa di gunakan maka masih menggunakan kayu tersebut, jika tidak maka kita harus mengganti kayu tersebut. jika seluruh bagian rumah sudah di perbaiki maka ke tahap akhir yaitu pengecatan rumah.

..................dapat disimpulkan bahwa sebelum kita mengecat, kita harus membersihkan seluruh permukaan dinding yang akan di cat, dan memastikan seluruh permukaan dinding rata, selanjutnya pastiakan semua kayu bisa di gunakan, setelah semua ok maka kita lanjut ke tahap pengecatan.

Results (English) 1:

First, we have to clean all surfaces that will be in the paint, then to the stage (flaking paint) that is flaky, if there is debris we should clean it first, otherwise we can get to the next stage. the next step is a handy Putty to equate all surfaces, if in need of PuTTY then we should mendempul from beginning to end. If not using PuTTY then we must flatten, then (exposed wood) that is checked and examined the whole wood is wood that can be used or not. If you can use it still uses the wood, if not then we have to replace the wood. If the whole House is in the final stage to then fix that is painting the House................... it can be concluded that before we paint, we had to clean the entire surface of the wall that will be in the paint, and make sure the entire surface of the median wall, then pastiakan all wood can be use, after all is ok then we proceed to the stage of the painting.

Results (English) 2:

first, we have to clean all surfaces to be painted, then to stage (flaking paint) that is flaky, if there are bits we need to clean up first, if not we can get to the next stage. the next stage of putty useful to equalize all surfaces, if need putty then we must caulking from start to finish. if not use putty then we should flatten, then (exposed wood) which check and examine the whole timber if the timber can be used or not. if it can be used then still use the wood, if not then we have to replace the wood. if all parts of the house fully restored it to the final stage is painting the house. .................. it can be concluded that before we paint, we have to clean the entire surface of the wall to be painted , and make sure the entire surface of the flat wall, next pastiakan all wood can be used, after all ok then we go to the painting stage.