Results (
English) 1:
[Copy]Copied!
b) Membubut straightJob membubut straight to the type of work that is relatively short, it can be done with direct pencekaman. For job membubut straight kesepusatan the results of the required precision, then pembubutannya should be done between two flashlights.While the work of the membubut straight to the object is long and small diameter then it should note a few things:o the workpiece is supported with two flashlightso use a buffer, the carrier and the carrier plate when benda work long.o the chisel should be as high as flashlighto select the magnitude of the speed rotation using formulas or using tableso set the position of the workpiece touches and chisel set dial measure on eretan transverse at position 0o set the position of the chisel on the limits of the maximum tip early step on the dial eretan lengthwise position 0o measurement should use measuring instrument machine itselfo use a chisel that have the right cut cornero run the engine and look at the magnitude of consumption as well as the results of pemotongannya.
Being translated, please wait..