c) Membubut tirus (konis)Membubut t

c) Membubut tirus (konis)
Membubut tirus serupa dengan membubut lurus hanya bedanya gerakan pahat disetel mengikuti sudut tirus yang dikehendaki pada eretan atas, atau penggeseran kepala lepas atau dengan alat Bantu taper attachment (perlengakapan tirus). Jenis pahatnya juga serupa yang digunakan dalam membubut lurus. Penyetelan peralatan eretan atas, atau penggeseran kepala lepas atau dengan alat bantu taper attachment pada saat membubut tirus tergantung pada sudut ketirusan benda kerja yang akan dikerjakan.

Results (English) 1:

c) Membubut of tyre (konis)Membubut tyre is similar to membubut only difference between straight chisel movement is set to follow in the tyre angle desired on eretan top, or panning head off or with the tool tapers attachment (equipment tyre). Pahatnya are also similar type used in membubut straight. Setup equipment eretan top, or panning head off or with the tool tapers at the time membubut tyre attachment depending on the angle of ketirusan workpiece machined.

Results (English) 2:

c) Turning tapered (conical)
taper similar to a lathe Turning only difference straight chisel movement is set to follow the desired taper angle on the sleigh above, or shifting the head off or with a tool taper attachment (perlengakapan tapered). Similar types of chisels are also used in turning straight. Tuning equipment sledge over, or shifting the head off or with tools when lathe attachment taper taper taper angle depends on the workpiece to be done.