Cara Menggunakan Jangka Sorong1.Awa

Cara Menggunakan Jangka Sorong

1.Awal persiapan, kendurkan baut pengunci dan geser rahang geser, pastikan rahang geser bekerja dengan baik. Sobat hitung jangan lupa untuk cek ketika rahang tertutup harus menunjukkan angka nol. Jika tidak menunjukkan angka nol sobat bisa mensettingnya.

2. Langkah/ cara menggunakan jangka sorong selanjutnya adalah membersihkan permukaan benda dan permukaan rahang agar tidak ada benda yang menempel yang bisa sebabkan kesalahan pengukuran.

3. Tutup rahang hingga mengapit benda yang diukur. Pastikan posisi benda sesuai dengan pengukuran yang ingin diambil. Lalu baca skalanya.

Results (English) 1:

How To Use A Caliper1. Initial preparation, loosen the locking bolt and slide the jaw slide, make sure that the sliding JAWS work well. Friend count do not forget to check when the jaw is closed should show zeros if not show zero PAL can mensettingnya.2. Steps/how to use a caliper is clean the surface of the object and the surface of the jaw so that there are no objects attached that could incur the errors of measurement.3. close the JAWS to enclose objects that are measured. Make sure the position of the object in accordance with the measurements that would like to take. And read his scale.

Results (English) 2:

How to Use Term Sorong 1.Awal preparation, loosen the locking bolt and slide the sliding jaw, make sure the sliding jaw worked well. Buddy count do not forget to check when the jaw is closed must show zero. If it does not show zeros friend can mensettingnya. 2. Step / how to use a vernier caliper next is to clean the surface of the object and the surface of the jaw so that no objects attached that could be caused measurement errors. 3. Close the jaws until flanking the measured object. Make sure the position of objects in accordance with the measurement to be retrieved. Then read the scale.